How to Put My SIM
Card in a Desktop thumbnail
USB SIM card readers
enable you to read your SIM card on your computer.
Although a SIM card
is normally used to store contacts on your cell phone, you can also use it on
your desktop or laptop computer. Various manufacturers offer USB SIM card
readers for computers that connect to your machine's USB port. Once connected,
you can read, modify, back up and delete entries from the card. The card
readers are accompanied by software which you must install on your computer.
Have a question? Get an answer from Online Tech Support now!
Other People Are
Reading
How to Copy a SIM Card to a ComputerHow to
Copy a SIM Card to a Computer
How to Make a Backup of a Phone SIM CardHow
to Make a Backup of a Phone SIM Card
Things You'll Need
USB SIM card reader
Instructions
1
Purchase a USB SIM card reader from an
electronics store or online vendor. Ensure that the card reader includes a
software disc.
2
Remove the SIM card from your cell
phone. The card is located in your phone's battery compartment. Disconnect the
battery cover and battery, then slide the SIM card from its slot.
Sponsored Links
Promo Telkomsel Poin
Dapatkan Hadiah Utama Emas 1Kg. Ayo
Tukarkan Poin Anda Sekarang!
www.telkomsel.com/telkomselpoin
3
Insert the SIM card into the card
reader according to the user manual that came with your reader. Plug the reader
into an available USB port on your computer.
4
Insert the card reader's software disc
into your disc drive. The installer should open automatically. If not, open it
by double-clicking "My Computer," then double-clicking on your disc
drive. Follow the on-screen prompts until the software is installed.
5
Remove the USB SIM card reader from the
USB port. Restart your computer. The USB SIM card reader must be removed, or
else Windows may attempt to boot from the reader.
6
Insert the USB SIM card reader again
after Windows boots completely. Launch the card reader software by clicking
"Start" and "All Programs," then clicking on the name of
the card reader.
Sponsored Links
IM Card -
Inserting/Removing - HP Mini 110-1046R Netbook
Note The battery and
SIM slot location may vary, depending on the netbook model.
Remove the battery from the HP Mini
110-1046R Netbook.
Remove Battery
Gently insert the SIM card in the SIM card
Slot.
Note Determine SIM card orientation based
on the SIM card image printed in the battery compartment.
Insert SIM
Reinsert the battery then power on the
netbook.
Insert Battery
.jpg)
